Zhongwei Aixin: New Launch of the H-Bridge DC Bidirectional Motor Driver Chip – AiP6208C
The AiP6208C is a single-channel, low-on-resistance H-bridge DC bidirectional motor driver IC launched by Wuxi AMEC Aixin. It supports four control modes—motor standby, forward rotation, reverse rotation, and braking—and features integrated undervoltage and overtemperature protection. With its wide supply-voltage range, low power consumption, compact footprint, and minimal external component count, it is widely used in small brushed DC motor drive applications such as IR CUT modules, smart locks, and consumer electronics, making it a cost-effective micro-motion-control solution.
2026-04-24
On April 21, 2026, Naxin Micro announced the launch of China’s first isolation gate driver—based on a fully domestically sourced supply chain, TÜV Rheinland-certified, and compliant with the ISO 26262 ASIL D safety integrity level: the NSI6911F series. Designed specifically for high-voltage applications such as main drive inverters, on-board chargers, and DC-DC converters in new-energy vehicles, this product family delivers a peak drive capability of up to 19 A, common-mode transient immunity (CMTI) of ±150 kV/μs, and integrates a 12-bit high-precision isolated sampling ADC along with an advanced diagnostic architecture, providing higher safety and greater system integration for electric-drive systems in new-energy vehicles.
2026-04-24
Naxinwei Launches Next-Generation Isolated CAN Transceiver NSI1150
On April 16, 2026, Novosem announced the launch of its new industrial-grade isolated CAN transceiver, the NSI1150. Built on Novosem’s third-generation isolation technology, the device delivers bus protection with a withstand voltage of ±70 V and a common-mode transient immunity (CMTI) of up to ±150 kV/μs (typical). Compared with its predecessor, the NSI1050, the NSI1150 offers significant improvements in reliability and noise immunity. In addition, the NSI1150 integrates Novosem’s self-developed CAN FD transceiver, supporting communication speeds of up to 5 Mbps.
2026-04-24
Naxinwei Launches Multi-RGB Ambient Lighting Driver Chip NSUC1527
As intelligent cockpits continue to evolve, automotive interior ambient lighting is shifting from its early role as mere decorative illumination to becoming a critical component of in-cabin interaction, with drive solutions likewise evolving from single-device functionality toward integrated, system-level designs. In response to this shift, Novosem has further refined its automotive lighting product portfolio by launching a new-generation driver chip for area-based, surface-lighting ambient applications: the highly integrated, high-performance automotive ambient lighting driver “MCU+” NSUC1527.
2026-04-24
Jiangsu Runshi: Runshi Technology Launches the 70V High-Voltage Automotive-Grade LDO RS3009-Q1
The adoption of a 48V bus voltage system in passenger vehicles has been widely recognized across the industry, particularly in new-energy vehicles, where an increasing number of components and modules are now designed to be compatible with 48V systems. This, in turn, places higher voltage-rating requirements on primary power-conversion ICs. To address this need, Runshi Technology has launched the RS3009-Q1, a 70V high-voltage automotive-grade LDO.
2026-04-24
Sirep: Newly Launched Ultra-Low Temperature Drift Precision Voltage Reference Module TPR70ULTC
Sirep 3PEAK has launched the ultra-low temperature-drift precision voltage reference module TPR70ULTC. Leveraging an innovative closed-loop temperature-control architecture, this product achieves precise control of the chip’s surface temperature across a wide operating range of –40°C to 80°C, reducing temperature drift to as low as 0.1 ppm/°C. This meets the stringent requirements of high-end instrumentation for highly stable voltage references and is well suited for precision measurement equipment and high-reliability applications.
2026-04-21
Silicon Labs: Launches Automotive-Grade High-Side Switch TPW4020DQ
In the sweeping trends of electrification and intelligentization, high-side switches serve as a critical interface between digital control systems and physical actuators, making their performance of paramount importance. To meet the stringent demands of the high-end market for superior performance, reliability, and advanced intelligence, Silipu has officially launched the next-generation, high-end, dual-channel smart high-side switch TPW4020DQ, specifically designed for body electronics control applications.
2026-04-24
Rockchip: Major Update to RK182X | RKNN3 SDK V1.0.0 Released, Fully Supporting Multimodal Models
Rockchip has officially released the RK1820/RK1828 AI coprocessor RKNN3 SDK V1.0.0, which is perfectly compatible with the RK3588/RK3576 + RK1820/RK1828 hardware configuration. This SDK provides full-stack software support for edge-side AI model deployment, delivering comprehensive upgrades in performance, model compatibility, functionality, and accuracy, while offering outstanding advantages in high performance, broad compatibility, and excellent energy efficiency.
2026-04-10
Hangshun Chips: HK32F403 CAN-FD Breaks the Impasse in Industrial Connectivity
In fields such as industrial automation, new-energy vehicles, and intelligent control, the traditional CAN bus is facing bottlenecks due to its low data transmission rate and limited frame capacity, making it difficult to meet the demands of real-time interaction with massive amounts of data. Hangshun Chips is now proudly introducing the HK32F403 CAN-FD, a core product that boasts high speed, wide bandwidth, strong compatibility, and exceptional reliability. With these robust technical capabilities, it provides a domestically developed, optimal solution for efficient communication in complex scenarios, helping equipment break through performance limitations and gain a competitive edge in the era of smart connectivity.
2026-04-10